Original HEIDENHAIN 3D Coordinate system model
• Suitable for education
• Display of the X, Y and Z axes and the corresponding rotating axis (A, B and C)
• Printed DIADUR logo and HEIDENHAIN logo
Rotary encoder with integral bearing
Differentiable revolutions: 4096
Positions per revolution: 8192
Data interface: EnDat01
Output code: Binary
Line count: 2048
Output signal: ~1Vpp
Cutoff frequency (-3 dB): 400.00 kHz
Power supply: 3.6 V ... 14 V
Coupling version: without coupling
Shaft: Tapered shaft 1 to 10, functional diameter 9.25 mm, back-off thread M10 and M6
Degree of protection: IP40 (EN60529)
Operating temperature: -40/+115 °C
Electrical connection: Plug connector, straight, double-row, 12-pin, with locking mechanism and walls
Pin configuration: D323746
Connecting direction: Cable outlet for axial and radial use
Included part: Mounting kit with spacer plates and central screw
Incremental rotary encoder with integral bearing for mounting by stator coupling.
Line count: 2048
Additional circular 1 sine and 1 cosine
Scale track: signal/revolution
Output signal: ~1.05Vpp
Power supply: 5 V (+-5 %)
Coupling version: without coupling
Shaft: Tapered shaft 1 to 10, functional diameter 9.25mm, back-off thread M10 and M6
Degree of protection: IP40 (EN60529)
Operating temperature: -40/+120 °C
Electrical connection: Plug connector, straight, double-row, 14-pin, with locking mechanism and walls
Pin configuration: D319274
Connecting direction: Cable outlet for axial and radial use
Included part: Mounting kit with spacer plates and central screw
Ergonomic handwheel from Heidenhain, for i.a. iTNC 530, TNC 620 & TNC 640.
Can replace i.a. HR 410.
Keypad I: X, Y, Z, IV, V, actual position capture
Keypad II: 3x rapid traverse (slow, medium, fast)
Keypad III: Minus, Plus
Keypad IV: function A, function B, function C
Keypad V: no specified value
Clips keys:
Permissive buttons: 2xNO/2xNO
Emergency stop: 1
Number of magnetic holding pads: 2
Number of status LEDs: 12
Data transfer: Cable
Electrical connection: Flange socket, male, 13-pin, with bayonett socket
Diagnostic tool from Heidenhain, to test measuring systems from Heidenhain.
• EnDat 2.1 or EnDat 2.2 (with or without incremental signals)
• DRIVE-CLiQ
• Fanuc Serial Interface
• Mitsubishi high speed interface
• Panasonic Serial Interface
• Yaskawa Serial Interface
• 1 VPP with Z1 track
• 1 VPP
• 11 μAPP
• TTL
• HTL (signal adapter ID 1093210-01 required)
Display: 4.3-inch touchscreen
Supply voltage: DC 24V
Power consumption: max. 15W
Operating temperature: 0°C to 40°C
Protection: EN 60529 IP20
Dimensions: 145mm × 85mm × 35mm
Language: German, English, French, Italian, Spanish, Japanese, Korean, Chinese (simplified), Chinese (traditional)
Set of 16 extra buttons for Heidenhain HR 510 Handwheel.
- 16-piece accessories set
- For adapting the key assignment of the handwheel
- Included snap-on keys (one piece each)
o Black: 5 x without symbol FCT A, FCT B, FCT C
o Green: Spindle On, NC start
o Red: NC Stop, Spindle stop
o Orange: B, C
o Gray: Spindle left, Spindle right
Threaded adapter from Heidenhain, which makes it possible to use styli with M4 threads, for example on Heidenhain TS 3D probes.
The adapter has external M3 thread, and internal M4 thread.
Heidenhain offers styli in a variety of materials, lengths and ball diameters. All styli are threaded with M3, so they fit directly on e.g. 3D probes from HEIDENHAIN.
Heidenhain offers styli in a variety of materials, lengths and ball diameters. All styli are threaded with M3, so they fit directly on e.g. 3D probes from HEIDENHAIN.
Få den nyeste viden om NORDIC med vores nyhedsbrev
*Jeg giver samtykke til, at NORDIC ApS må kontakte mig med nyheder, informationer og tilbud. Jeg må kontaktes pr. e-mail, telefon og brev. Jeg accepterer samtidig, at NORDIC ApS behandler mine personoplysninger til ovenstående formål. NORDIC ApS er dataansvarlig. Du kan til hver en tid trække dit samtykke tilbage.
NORDIC ApS & CNC Consult ApS have been merged from January 12, 2022
We have chosen to gather our competencies in a joint company, where we will continue to deliver products, solutions and support customers in the Nordic countries.
Our services, services and products will be those same, just gathered under NORDIC ApS!
Get the latest knowledge about NORDIC with our newsletter
*I give consent for NORDIC ApS to contact me with news, information and offers. I can be contacted by email, phone and letter. I also accept that NORDIC ApS processes my personal information for the above purposes. NORDIC ApS is the data controller. You can withdraw your consent at any time. You can withdraw your consent at any time.
Be at the forefront of developments!
Get the latest knowledge about NORDIC ApS with our newsletter