Chemicals

Oil, grease, coolant etc.

Stock leader with products such as Divinol Lithogrease from ZELLER+GMELIN, Castrol Tribol, BASF G48 Glysantin & Metaflux 70-81

Filters

Thread
Length
Working temperature
Color temperature
IP Classification
Cable length
Ball diameter
Ball material
Lifetime
Lumen
Light angle
Shaft material
Voltage
Type
Manufacture
Manufacture compatibility
Product compatibility
Number of axes
Arm size
Width
Data output
Diameter
Depth measurement
Colour
Consumption
Inner diameter
Capacity
Measuring range
Accuracy
Resolution
Radius
Citrax EP No. 1 – 400g Grease cartridge
Kyodo Yushi
Citrax EP No. 1 grease by Kyodo Yushi is a multi-purpose grease made mainly from refined mineral oil and lithium soap with EP additives containing no toxic heavy metals which are regulated as noxious industrial wastes. Citrax EP No. 1 is excellent in heat-resistance, water-resistance and EP property as well as mechanical stability, and suitable for general application and sliding surfaces. The Citrax EP No 1 grease has a service temperature range of between-20℃ and 130℃, uses Lithium Soap as the thickener, mineral oil as the base oil and has base oil kinematic viscosity (100℃) of 15.6mm2/s using the test method ASTM D445. Although the majority of our customer that purchase this grease have Mazak machines, the Citrax EP concertina grease cartridges are fitted on a range CNC machine tools and we have it in stock and ready to ship.

26,75 excl. tax

Divinol Lithogrease 000 – 900g Tube
ZELLER+GMELIN
Divinol Lithogrease 000 is used to lubricate rollers in linear guides for machine tools. It can also be used for lubrication of gears with a large mechanical load. The product can be easily pumped into central lubrication systems. Due to its low consistency, Divinol Lithogrease 000 shows a clearly better flow behavior as a comparable fat of NLGI class 00. Delivered in 900g tubes (other sizes can be supplied on request!).

26,75 excl. tax

Divinol Lithogrease 000/150 – 900g Tube
ZELLER+GMELIN
Divinol Lithogrease 000/150 is used for lubrication of rollers in linear guides for machine tools, i.a. on HERMLE CNC machines. It can also be used for lubrication of gears with a large mechanical load. The product can be easily pumped into central lubrication systems. Due to its low consistency, Divinol Lithogrease 000/150 shows a clearly better flow behavior as a comparable NLGI Class 00 grease. Delivered in 900g tubes (other sizes can be supplied on request!).

26,75 excl. tax

Divinol Lithogrease L800 – 900g Tube
ZELLER+GMELIN
Divinol Fett L 800 is used for bearing lubrication of circular tables in machining centers. Stick-slip effects are avoided due to high oil viscosity. Divinol Fett L 800 is also suitable for lubrication of mechanical gears. Delivered in 900g tubes (other sizes can be supplied on request!).

40,20 excl. tax

GLYSANTIN® G48® Concentrate – 1L Can
BASF
The product has previously been called "Glysantin G48 Protect Plus". Can be delivered in 1L cans, 20L cans, 60L barrels & 210L barrels. Officially approved for: DMG MORI, 2G, Audi (TL 774-C), BMW (BMW LC-87), BMW Motorrad (BMW LC-87), Deutz (DQC CA-14), Deutz-Fahr (< 03/2017), Eicher Engines (TMTL Part No. 93183798), Fendt, Huerlimann (< 03/2017), Jenbacher (TA 1000-0200), Lamborghini-Tractors (< 03/2017), Liebherr (Minimum LH-00-COL3A), MAN Truck and Bus (MAN 324 NF), MAN Energy Solutions (Liste 3.3.7), Mercedes-Benz Cars (MB-Approval 325.0), Mercedes-Benz Truck and Bus (MB-Approval 326.0 (Ready Mix)), Mercedes-Benz Truck and Bus (MB-Approval 325.0), MAN Truck and Bus (MB-Approval 326.0 (Ready Mix)), Mini (BMW LC-87), Mitsubishi Carisma (1996-2004), Mitsubishi Colt (2004-2007), MTU (MTL 5048), MWM (TR 2091), Opel (B 040 0240), Porsche (< 1995), Rolls-Royce (BMW LC-87), Saab (690 1599), Same (< 03/2017), Seat (TL 774-C), SETRA (MB-Approval 325.0), Skoda (TL 774-C), Smart (MB-Approval 325.0), Tesla (> 2013), Volkswagen (VW) (TL 774-C), Volvo Trucks (TR 1286083) Also protects the following: Alfa Romeo (1976-2005), ATLAS, Bentley (1980-2005), Ferrari (1979-2009), Fiat (1982-2005), Ford (< 1997), Jaguar (1986-1999), Lada, Lancia (1976-2005), Lotus (1980-1999), Morgan, Toyota (> 2015) GLYSANTIN® G48® meets the following coolant specifications: AS 2108-2004, ASTM D 3306, ASTM D 4985, BS6580:2010, CUNA NC 956-16, AFNOR NFR 15-601, JIS K 2234:2206, PN-C 40007:2000, SAE J1034, ÖNORM V 5123, SANS 1251:2005 and China GB 29743-2013

12,10 excl. tax

GLYSANTIN® G48® Concentrate – 20L Can
BASF
The product has previously been called "Glysantin G48 Protect Plus". Can be delivered in 1L cans, 20L cans, 60L barrels & 210L barrels. Officially approved for: DMG MORI, 2G, Audi (TL 774-C), BMW (BMW LC-87), BMW Motorrad (BMW LC-87), Deutz (DQC CA-14), Deutz-Fahr (< 03/2017), Eicher Engines (TMTL Part No. 93183798), Fendt, Huerlimann (< 03/2017), Jenbacher (TA 1000-0200), Lamborghini-Tractors (< 03/2017), Liebherr (Minimum LH-00-COL3A), MAN Truck and Bus (MAN 324 NF), MAN Energy Solutions (Liste 3.3.7), Mercedes-Benz Cars (MB-Approval 325.0), Mercedes-Benz Truck and Bus (MB-Approval 326.0 (Ready Mix)), Mercedes-Benz Truck and Bus (MB-Approval 325.0), MAN Truck and Bus (MB-Approval 326.0 (Ready Mix)), Mini (BMW LC-87), Mitsubishi Carisma (1996-2004), Mitsubishi Colt (2004-2007), MTU (MTL 5048), MWM (TR 2091), Opel (B 040 0240), Porsche (< 1995), Rolls-Royce (BMW LC-87), Saab (690 1599), Same (< 03/2017), Seat (TL 774-C), SETRA (MB-Approval 325.0), Skoda (TL 774-C), Smart (MB-Approval 325.0), Tesla (> 2013), Volkswagen (VW) (TL 774-C), Volvo Trucks (TR 1286083) Also protects the following: Alfa Romeo (1976-2005), ATLAS, Bentley (1980-2005), Ferrari (1979-2009), Fiat (1982-2005), Ford (< 1997), Jaguar (1986-1999), Lada, Lancia (1976-2005), Lotus (1980-1999), Morgan, Toyota (> 2015) GLYSANTIN® G48® meets the following coolant specifications: AS 2108-2004, ASTM D 3306, ASTM D 4985, BS6580:2010, CUNA NC 956-16, AFNOR NFR 15-601, JIS K 2234:2206, PN-C 40007:2000, SAE J1034, ÖNORM V 5123, SANS 1251:2005 and China GB 29743-2013

185,55 excl. tax

Heidenhain Sealfat Molykote (202173-03)
Heidenhain
Original Sealfat Molykote (Dichtlippenfett Molykote)
  • Lubricant F7
  • Molykote 111 Compound
  • 25g Tube

13,98 excl. tax

METAFLUX 70-81 – 400ml Spray
Metaflux
Improves the replacement of moving parts on i.a. CNC machines. Prevents wear, seizure and corrosion of mechanical joints, sliding parts with extreme loads (eg forklifts), reduces vibration noises, helps remove nuts on a damaged thread by building it up immediately. Maintains all metal and steel parts and protects against variations caused by cold and heat. Highly recommended for all industrial areas such as automobile, civilian and military ports, water treatment plants, power plants, hospitals, civilian and military structures and installations, CNC machines, etc. Excellent on stainless steel!
  • Abrasion resistant
  • Unique industrial heavy metal lubricant based on titanium to ensure the highest performance under all extreme conditions over time
  • Resistant to salt water, water, oil, gasoline, most acids, lye, gases and vapors
  • Prevents galvanic contact corrosion
  • Nickel, copper and aluminum free without the possibility of electrolyte formation
  • Lubricant base: Titanium, color: gray
  • Temperature range: -180 ° C to +1,350 ° C [-356 ° F up to +2,462 ° F]
  • Pressure resistance: 2,400 kPa / cm² (= 23,400 N / cm²) [33 .938 psi]

40,20 excl. tax

METAFLUX 70-8508 – 2x 4g Packs
Metaflux
Improves the replacement of moving parts on i.a. CNC machines. Prevents wear, seizure and corrosion of mechanical joints, sliding parts with extreme loads (eg forklifts), reduces vibration noises, helps remove nuts on a damaged thread by building it up immediately. Maintains all metal and steel parts and protects against variations caused by cold and heat. Highly recommended for all industrial areas such as automobile, civilian and military ports, water treatment plants, power plants, hospitals, civilian and military structures and installations, CNC machines, etc. Excellent on stainless steel!
  • Abrasion resistant
  • Unique industrial heavy metal lubricant based on titanium to ensure the highest performance under all extreme conditions over time
  • Resistant to salt water, water, oil, gasoline, most acids, lye, gases and vapors
  • Prevents galvanic contact corrosion
  • Nickel, copper and aluminum free without the possibility of electrolyte formation
  • Lubricant base: Titanium, color: gray
  • Temperature range: -180 ° C to +1,350 ° C [-356 ° F up to +2,462 ° F]
  • Pressure resistance: 2,400 kPa / cm² (= 23,400 N / cm²) [33 .938 psi]

2,68 excl. tax

METAFLUX 70-8535 – 350g Can
Metaflux
Improves the replacement of moving parts on i.a. CNC machines. Prevents wear, seizure and corrosion of mechanical joints, sliding parts with extreme loads (eg forklifts), reduces vibration noises, helps remove nuts on a damaged thread by building it up immediately. Maintains all metal and steel parts and protects against variations caused by cold and heat. Highly recommended for all industrial areas such as automobile, civilian and military ports, water treatment plants, power plants, hospitals, civilian and military structures and installations, CNC machines, etc. Excellent on stainless steel!
  • Abrasion resistant
  • Unique industrial heavy metal lubricant based on titanium to ensure the highest performance under all extreme conditions over time
  • Resistant to salt water, water, oil, gasoline, most acids, lye, gases and vapors
  • Prevents galvanic contact corrosion
  • Nickel, copper and aluminum free without the possibility of electrolyte formation
  • Lubricant base: Titanium, color: gray
  • Temperature range: -180 ° C to +1,350 ° C [-356 ° F up to +2,462 ° F]
  • Pressure resistance: 2,400 kPa / cm² (= 23,400 N / cm²) [33 .938 psi]

80,54 excl. tax

MOTOREX Spindle Lube ISO VG 68 – 5L Bag in Box
Motorex
MOTOREX Spindle Lube Oils are microfiltered HLP-D hydraulic fluids (DIN 51 524/T2). Their guaranteed high purity make them ideal for lubricating bearings in motor and high-speed spindles. The purity class is set at 15/ 13/10 under the ISO 4406 standard. These specially developed spindle lubricants have outstanding detergent and dispersant properties. They also contain sophisticated wear-reducing ingredients and boast effective extreme pressure (EP) properties, rapid air release and top-notch anti-foaming. SPINDLE LUBE OILS are ultra-fine filtered HLP-D hydraulic oils (DIN 51 524/T2). The purity class is specified as 15/13/10 in accordance with the ISO 4406 standard. They are characterized by excellent detergent and dispersing properties.

107,43 excl. tax

MOTOREX Spindle Lube ISO VG 68 15/13/10 – 4L Can
Motorex
Spindle Lube Oils are ultra-fine filtered HLP-D hydraulic oils (DIN 51 524/T2). The purity class is specified as 15/13/10 in accordance with the ISO 4406 standard. They are characterised by excellent detergent and dispersing properties.

93,98 excl. tax

Tribol GR 100-00 PD – 900g Tube
Castrol
The Tribol GR 100 PD series can be used for long-term lubrication under even the most difficult operating conditions, e.g. extreme pressure, vibrations, shock loads and wide temperature ranges (-35 ° C to 140 ° C) in heavily loaded roller and plain bearings. Typical applications include bearings on rotary and ground spindles, for gear motors, to which they are exposed shock loads, in shielded woodworking machines as well as for bearing surfaces on printed circuit boards. Castrol Tribol ™ GR 100 PD Series (formerly Longtime ™ PD Series) are lithium-based greases containing highly refined mineral oils and is fortified with the Microflux Trans Additive System (MFT). Delivered in 900g tubes (other sizes can be supplied on request!).

32,94 excl. tax

Vær på forkant med udviklingen!

Få den nyeste viden om NORDIC med vores nyhedsbrev

*Jeg giver samtykke til, at NORDIC ApS må kontakte mig med nyheder, informationer og tilbud. Jeg må kontaktes pr. e-mail, telefon og brev. Jeg accepterer samtidig, at NORDIC ApS behandler mine personoplysninger til ovenstående formål. NORDIC ApS er dataansvarlig. Du kan til hver en tid trække dit samtykke tilbage.

Nordic ApS og CNC Consult Fusion

NORDIC ApS & CNC Consult ApS have been merged from January 12, 2022

We have chosen to gather our competencies in a joint company, where we will continue to deliver products, solutions and support customers in the Nordic countries.

Our services, services and products will be those same, just gathered under NORDIC ApS!

Be at the forefront of developments!

Get the latest knowledge about NORDIC with our newsletter

*I give consent for NORDIC ApS to contact me with news, information and offers. I can be contacted by email, phone and letter. I also accept that NORDIC ApS processes my personal information for the above purposes. NORDIC ApS is the data controller. You can withdraw your consent at any time. You can withdraw your consent at any time.

Be at the forefront of developments!

Get the latest knowledge about NORDIC ApS with our newsletter