Tastestifter
Styli
LED
LED
Vaterpas
Levels
Batterier
Batteries
Kabler
Cables
Tilbehør
Spare parts
NORDICstyli Styli (L200-6-M4-KOR)
NORDICstyli
L200-5-M4-KOR

We are stock leader with the most popular types of styli, used for 3D probes from i.a. Heidenhain, Renishaw, BLUM & Hexagon M&H.

226,00 excl. tax

Rotoclear 76330 - Rotor til S3
Rotoclear
76330

The conditions inside the machine tool are often very harsh. Not even hardened safety glass can withstand constant exposure to flying swarf for long: the machine window can become cloudy over time. Tools that break off can also damage the S3 window.

Our patented system enables fast and easy replacement of the machine window: all you have to do is loosen a single screw, replace the spinning window and then tighten the screw again. And you’re done!

This model is for standard use. When machining aluminum, we recommend 81738, as it is laminated and thus can better withstand the chips during machining.

546,00 excl. tax

Motorex Product
Motorex
304016
Used i.a. on older GF Mikron machines with Step-Tec spindles. Can be replaced by the new type "MOTOREX COOL-CORE READY PLUS B30". If switching to the new model, the system must be cleaned with "304588 - MOTOREX CS-CLEANER" (only a small amount is needed). COOL-CORE READY is used as coolant and an anti-corrosion agent in motor spindle cooling systems, in particular where there is an inadequate supply of clean drinking water available for mixing purposes. The substances it contains passivate the various materials and provide long-term protection against corrosion.

409,46 excl. tax

Featured brands

New products

FUCHS_1X20L
FUCHS
601861314
Zinc-free hydraulic oils (HLPD) with cleansing and dispersing properties. They possess good aging stability, excellent wear protection, oxidation stability, and good air separation properties. Also suitable for use as CLP lubricants. The formulation shows also excellent wear protection of roller bearing in the roller bearing wear test. The relevant test in the FAG/FE8roller bearing wear test at 7.5 rpm/80 °C at an axial load of 80 KN is passed with extremely low wear rates. In the summary all relevant performance criteria of industrial gear oils are passed and surpassed. The RENOLIN ZAF D HT products surpass the requirements for hydraulic fluids (according to DIN 51524, part 2) and industrial gear oils (DIN 51517, part 3). The products are universally applicable, the formulation is robust. The products have high oxidation and stability, also under the influence and in the presence of humidity and water. The development of the RENOLIN ZAF D HT Series is also focussed on excellent yellow metal compatibility. In different laboratory tests bronze material, copper/zinccontaining alloys are tested at high temperature over a long test period in dry and wet conditions. The property of the oil, the corrosiveness of the metal surface is determined. After the test, the content of dissolved metals in the oil phase is measured. The RENOLIN ZAF D HT products show excellent corrosion protection results, no copper, zinc metals are dissolved in the oil phase, also under severe test conditions. The RENOLIN ZAF D HT products guarantee, therefore, excellent corrosion protection of yellow metal materials which are used in pumps, hydraulic motors, hydraulic pistons and bearings. The oxidation stability, also in the presence of catalytically acting copper and iron and yellow metal materials, is high. The test shows at high temperatures the robustness of the formulations. The products are stable under severe conditions, sludge is reduced, carbon residues on metal surfaces can be reduced. Application The products of the RENOLIN ZAF D HT Series are high-performance robust hydraulic oils as well as lubricating oils. The products can also be used as industrial gear oils. RENOLIN ZAF D HT products are universal oils and can be used for various applications as hydraulic oils (HLP-D) as well as industrial gear oils (CLP, CLP-D). The RENOLIN ZAF-D HT Series is recommended as deterging hydraulic, gear and lubricating oil in hydraulic equipments, in presses and tool machines. RENOLIN ZAF D HT products can be used in stationary and mobile hydraulic systems. Industries: Minedrift, bjergværk, udforskning Kraftproduktion Konstruktion Transport Maskineri, udstyr Cement, kalk, gips Smedning Støbegods Metalprocesser Andre industrier Stål, metaller Specifications: Approvals: Recommendations: EAN: ArtNr: 601861314

113,33 excl. tax

FUCHS_4X4L
FUCHS
601768491
Finely filtered lubricating oil for tool spindles based on special, partially synthetic base oils. The high viscosity index ensures a stable lubricating film even at high temperatures. Extensive filtration measures enable a very high cleanliness class of 15/13/10 according to ISO 4406. Very good detergent and dispersant properties. Meets and exceeds the requirements according to DIN 51524-3: HVLP-D ISO 6743-4: HV (with DD properties)   Delivered in 4L cans, and can, among other things, replace MOTOREX SPINDLE LUBE ISO VG 68 15/13/10.

48,00 excl. tax

NORDICfilter - AG-35/93-GF-12-SS-210
NORDICfilter
AG-35/93-GF-12-SS-210
Quality filter from NORDICfilter which, among other things, replaces ID: 2290306 from DMG MORI & 1263454 / 0030 D 010 BH4HC from HYDAC. OD: 35 mm ID: 12,5 mm Length: 93 mm Fineness: 12 μm Max. perm. pressure: 210 bar

72,00 excl. tax

NORDICfilter - AG-35/93-GF-12-SS-210
NORDICfilter
AG-56/118-GF-12-SS-30-SOE
Quality filter from NORDICfilter, compatible with DMG MORI ID: 2502115 and 3060788 OD: 56,3 mm ID: 25,5 mm Length: 118 mm Fineness: beta12 = 1000 Max. diff. pressure: 30 bar

67,33 excl. tax

NORDICfilter - AG-35/93-GF-12-SS-210
NORDICfilter
AG-69/240-SS-50-SS
Quality filter from NORDICfilter which i.a. replaces DMG MORI ID: 2858141. OD: 69 mm ID: 34 mm Length: 240 mm Fineness: 50 μm

85,33 excl. tax

LUBE LHL-X100-7 (249137)
LUBE
249137
This LHL-X100-7 249137 LUBE Grease Cartridge is a next-generation lubricant that significantly reduces friction and wear and is used on a wide range of machine tools including Mazak (P52LA000111), Makino (Z192A1600010), Mori Seiki, Niigata, Jtekt, Koyo, Citizen, Tsugami, Denso, Toshiba, Daewoo, Howa, Okuma and Fanuc. It will precisely deliver the exact amount of lubricant required at a specific time to optimise performance of production machinery even under harsh conditions. In addition, the revolutionary lubricant developed for the LHL system helps to provide a cleaner and healthier factory environment. The LHL system needs only a fraction of the lubricant quantity compared to oil lubrication systems. The lower lubricant requirement of LHL significantly reduces lubricant costs and lubricant entering the coolant tank. Less lubricant in the coolant tank prevents degradation and hazardous waste disposal, ultimately extending tool life, reducing maintenance costs, and enhancing the machines life expectancy. The LHL-X100-7 prevents excess abrasion of a high-load bearing box and v-way, gib and plain bearing surfaces. It forms and maintains a strong oil film on roller bearings, ball screws and linear rolling surfaces. It also prevents rust with excellent anti-rust properties and will never emulsify in cutting fluids and it creates an ideal lubrication effect with a proper lubricant volume at a precisely timed interval.

79,33 excl. tax

Laser Beam Visualizer
NORDIC
NL-IRV-G
Laser Beam Visualizer - 850-1090nm light green

180,00 excl. tax

33.755.1064
NORDIC
NL33.755.1064
Laser glasses - Universalfit OD7+ 740 - 1100nm DIR LB5 VLT 40% OD7+ 800 - 1070nm

136,00 excl. tax

Vær på forkant med udviklingen!

Få den nyeste viden om NORDIC med vores nyhedsbrev

*Jeg giver samtykke til, at NORDIC A/S må kontakte mig med nyheder, informationer og tilbud. Jeg må kontaktes pr. e-mail, telefon og brev. Jeg accepterer samtidig, at NORDIC A/S behandler mine personoplysninger til ovenstående formål. NORDIC A/S er dataansvarlig. Du kan til hver en tid trække dit samtykke tilbage.

Be at the forefront of developments!

Get the latest knowledge about NORDIC with our newsletter

*I give consent for NORDIC A/S to contact me with news, information and offers. I can be contacted by email, phone and letter. I also accept that NORDIC A/S processes my personal information for the above purposes. NORDIC A/S is the data controller. You can withdraw your consent at any time. You can withdraw your consent at any time.

Nordic ApS og CNC Consult Fusion

NORDIC A/S & CNC Consult ApS have been merged from January 12, 2022

We have chosen to gather our competencies in a joint company, where we will continue to deliver products, solutions and support customers in the Nordic countries.

Our services, services and products will be those same, just gathered under NORDIC A/S!