Tribol GR 100-00 PD – 900g Tube

This LHL-X100-7 249137 LUBE Grease Cartridge is a next-generation lubricant that significantly reduces friction and wear and is used on a wide range of machine tools including Mazak (P52LA000111), Makino (Z192A1600010), Mori Seiki, Niigata, Jtekt, Koyo, Citizen, Tsugami, Denso, Toshiba, Daewoo, Howa, Okuma and Fanuc.It will precisely deliver the exact amount of lubricant required at a specific time to optimise performance of production machinery even under harsh conditions. In addition, the revolutionary lubricant developed for the LHL system helps to provide a cleaner and healthier factory environment.The LHL system needs only a fraction of the lubricant quantity compared to oil lubrication systems. The lower lubricant requirement of LHL significantly reduces lubricant costs and lubricant entering the coolant tank. Less lubricant in the coolant tank prevents degradation and hazardous waste disposal, ultimately extending tool life, reducing maintenance costs, and enhancing the machines life expectancy.The LHL-X100-7 prevents excess abrasion of a high-load bearing box and v-way, gib and plain bearing surfaces. It forms and maintains a strong oil film on roller bearings, ball screws and linear rolling surfaces. It also prevents rust with excellent anti-rust properties and will never emulsify in cutting fluids and it creates an ideal lubrication effect with a proper lubricant volume at a precisely timed interval.

FUCHS RENOLIT LI IDM 000 is used to lubricate rollers in linear guides for machine tools. It can also be used for lubrication of gears with a large mechanical load. The product can be easily pumped into central lubrication systems. Due to its low consistency, FUCHS RENOLIT LI IDM 000 shows a clearly better flow behavior as a comparable fat of NLGI class 00.Delivered in 900g tubes (other sizes can be supplied on request!).

If changing from "MOTOREX COOL-CORE READY" to "MOTOREX COOL-CORE READY PLUS", the system must be cleaned with "304588 - MOTOREX CS-CLEANER" (use only a small amount).CS-CLEANER is a neutral system cleaner for coolant circuits and the spindle cooling systems of machine tools. Thanks to innovative additives without any biocides, CS-CLEANER does not fall into the biocide product category and can be used worldwide without any restrictions.

Used i.a. on older GF Mikron machines with Step-Tec spindles. Can be replaced by the new type "MOTOREX COOL-CORE READY PLUS B30". If switching to the new model, the system must be cleaned with "304588 - MOTOREX CS-CLEANER" (only a small amount is needed).COOL-CORE READY is used as coolant and an anti-corrosion agent in motor spindle cooling systems, in particular where there is an inadequate supply of clean drinking water available for mixing purposes. The substances it contains passivate the various materials and provide long-term protection against corrosion.